11000 series

11000 series View larger

11000 PCB

New product

These switches are specially manufactured for defence and telecommunications applications.

Main features

  • Approvals : CECC 96201-005 and CECC 96201-008
  • Robust switches for high specification environments
  • Toggle action on 2-position models giving smooth mechanical operation
  • Plastic material with high insulation resistance
  • Several front panel sealing options
  • Bright chrome or matt black finish

Upon request, each individual switch can be submitted to a low level run-in test of 50 or 250 cycles to ensure suitability for special applications requiring a very high level of reliability (military, etc.).

More details

0820 20 30 10

Monday – Friday 9am to 5pm - Central European Time

Complementary products
  • 13000 series
    13000 series

    High reliability single pole and double pole momentary pushbuttons, with silver or gold plated contacts. Main features For panel or PCBUL and CECC approvedDesigned to European MIL specs.Bushing Ø 6,35 (1/4) and 11,9 (15/32)

    More
  • 12000 series
    12000 series

    Toggle switches specially manufactured for defense, telecommunications and other industrial applications. 1, 2, 3 and 4 pole configurations, silver, gold-plated silver or solid gold rivet contacts. Several front panel sealing options. Bright chrome, satin chrome or matt black finish. CECC approved. Several locking lever options. Main features Approvals:...

    More
  • 12000X778 series
    12000X778 series

    This range of professional toggle switches is suitable for use in military and other high specification environments. CECC and MIL approved, the 12000X778 toggle switch has a double shell case construction and pinned lever for extra mechanical strength and robust seal up to IP67. Available with solid rivet contact: gold plated silver/nickel alloy....

    More
  • Sealing boots
    Sealing boots

    Sealing boots prevent dust, sand and water from getting into switches. On toggle versions, they also prevent ice from blocking lever action. They are compatible with frontal sealing options K and X408. Main featuresSealing boots for toogle, pushbutton or rocker switchesAvailable in a wide range of colours. A sealing ring or washer is standard supplied...

    More
More info

Ergonomics 1

Ergonomics 2

Features

General specification

• Torque :1.25 Nm (.92 Ft.lb) max. applied between the 2 nuts
• Standard panel thickness : 2.5 mm (.098) max.

Environmental specifications

• Operating temperature : -40 °C to +85 °C

Electrical specifications

• Max. current/voltage rating with resistive load :
- silver contacts (A-AD2-X780) : 4 A 30 VDC
- gold contacts (D) : 100 mA 30 VDC
• Minimum load : AD2-X780-D contacts : 10 mA 50 mV, 10 µA 5 V min.
• Initial contact resistance : 10 mΩ max.
• Insulation resistance : 1,000 MΩ min. at 500 VDC
• Dielectric strength :
1,000 Vrms 50 Hz min. between terminals
2,000 Vrms 50 Hz min. between poles and between terminals and frame
• Contact bounce : 2 ms max

Materials

• Case : diallylphthalate (DAP)
• Actuator : brass, nickel plated
• Bushing : brass, nickel plated
• Housing : brass, nickel plated
• Contacts
A : silver
AD2 : gold plated silver (2 microns gold)
X780 : solid rivet - gold plated silver/nickel alloy
D : solid gold rivet
X910 : silver/nickel alloy
• Terminal seal : epoxy
• AD2 and X780 contacts can be used for high level applications. In this case, the
gold layer is considered only as a protection against oxidation during storage.

Over 65 years of experience

International customer support

Broadest offering of HMI solutions

Integrated industrial processes

Constant innovation

Need help?
Contact us by phone, email or live chat!

Callback request