XA unibody series

XA unibody

Nouveau produit

A very compact product. The X6 range includes the patented IDEC "Reverse energy structure" which opens the contact in case the button is damaged. Reset is done by either pulling or twisting the button. 




Main features 



  • 3rd generation E-stop with IDEC's original "Reverse energy structure"

  • Requires only Ø 16 mm x 19.5 mm for installation

  • Two ways of resetting - pulling and turning,

  • Gold-plated crossbar contacts,

  • Fully qualified and certified;

Plus de détails

Besoin de conseils

Demande de devis

0820 20 30 10

Lundi au vendredi de 9h à 17h

Téléchargement
En savoir plus

Ergonomie 1

Ergonomie 2

Caractéristiques

Spécifications générales

• Ø16.2 mm mounting hole;
• 19.5 mm depth (Solder terminal) or 23.9mm depth (Solder/tab terminal) behind the panel;
• Two button sizes - Ø 30 mm & Ø 40 mm;
• Two button colors - red for emergency and yellow for stop switch;
• Two ways of resetting - pulling and turning;
• Solder or solder/tab terminal #110 for easy connections;
• Direct opening action mechanism (IEC 60947-5-5 §5,2, IEC 60947-5-1, Annex K);
• Safety lock mechanism to prevent inadvertent operation (IEC 60947-5-5, §6,2);

Spécifications environnementales

• Operating temperatures: -25 to +60 °C (no freezing);
• Operating Humidity: 45 to 85% RH (no condensation);
• Storage temperatures: -45 to +80 °C;
• Degree of protection (IEC 60529): IP65
• Vibration resistance:
Operating extremes: 10 to 500 Hz, amplitude 0,35 mm, acceleration 50 m/s²;
Damage limits: 10 to 500 Hz, amplitude 0,35 mm, acceleration 50 m/s²;
• Shock resistance:
Operating extremes: 150 m/s² maximum
Damage limits: 1,000 m/s² maximum

Spécifications électriques

• Rated insulation voltage (Ui): 250 V;
• Rated thermal current (Ith): 5 A:
• Up to 2 NC contacts
• Contact resistance: 50 mohm max (initial value);
• Insulation resistance: 100 Mohm min (500 V DC megger);
• Overvoltage Category: II (IEC 60664-1);
• Impulse Withstand Voltage: 2.5 kV (IEC60664-1/60947-5-1);
• Short-circuit Protection: 250 V/10 A fuse, (Type aM IEC60269-1, IEC60269-2)
• Mechanical durability : 1,000,000 operations min;
• Electrical durability : 100,000 operations min;
• Minimum applicable load : 5 V AC/DC, 1 mA;

Matériaux

• Actuator : Plastic;
• Contact : gold-plated

Spécifications mécaniques

• Push to lock : 10,5 N, Pull to reset : 10 N, Turn to reset : 0,16 Nm

Homologations

  • CSA
  • UL

Plus de 65 ans d'expérience

Un support client international

La plus large gamme d'IHM (composants & solutions)

Des process industriels intégrés

Une innovation constante

Besoin d'aide ?
0820 20 30 10

Demande de rappel