Configurator (13 produits)

Actuator

Cap

Illumination

Mounting

Sealing

Function

Product configurator

Pushbutton Switches

Showing 1 - 13 of 13 items
  • ZP series - PCB

    ZP series are tiny pushbutton switches with metal bushingMain features Single or double throw pushbutton switchesSolder log and straight PC terminalsGold or silver plated contactsØ4.83 mm threaded bushingMomentary contactsSingle pole double throw pushbutton switches with solder lug or straight PC terminals, gold or silver plated contacts. Ø4.83 mm...

  • SMT TP series

    Single pole pushbutton switches designed for surface mount, with tape and reel packaging. Reflow solderable and washable, ESD protected up to 10KV, available with or without positioning pins.Main features Entirely designed for surface mountTape and reel packagingReflow solderableHigh temperature plastic materialsTin plated ground plateTerminal coating :...

  • TP series

    Tiny washable momentary pushbutton switches available in single pole and double pole with gold or silver plated contacts and terminals. Main featuresProcess sealed : single piece case, O-ring seal between actuator and bushing, epoxy sealed terminalsWide variety of contact materialsSame PCB layout as TL, TR and TG tiny switches

  • 9100-9200-9500 series - PCB

    Normally open or normally closed models with solder lug, straight PC or right angle PC terminals. Gold plated brass contacts, front panel sealing option available. Main featuresPanel and PC mount models, horizontal or vertical Self-cleaning and butt action contacts Several plunger options

  • PHAP40 series

    The PHAP40 is the smallest latching action switch of the APEM range.Main featuresAudible “click” Models with 6 x 6 mm case on request Double pole, double throw Non-shorting contacts Moulded-in terminals

  • SP series - PCB

    Single and double pole momentary pushbutton switches with silver or gold plated contacts. Panel or PC mount, rated up to 1 amp, UL models available. Main featuresSealed : Secure assembly of the two case parts, Internally sealed bushing, Epoxy sealed terminals Process compatible (plain bushing models) : Wave solderable,  Washable

  • 8000 series - PCB

    Momentary or alternate action pushbutton switches. Button returns in upper position after actuation Main featureswith bushing Ø6.35 mm (1/4) and Ø11.9 mm (15/32). Single pole and double pole models, momentary or latching action, solder lug or PC terminals. Ratings up to 6 amps,UL option numerous plunger, bushing and accessory options.

  • 9400-9600 series - PCB

    Momentary pushbutton switches. Normally open, normally closed or combined function. Solder lug, PC or quick connect terminals available with gold plated or silver contacts. Front panel option seal available. Main featuresTwo case lengths Three electrical functions Sealing options Model X1146 with dia.16 mm (.630) bushing

  • IT series

    Printed circuit mount, latch down mechanism pushbuttons with highest dielectric 6 KV rating and long life cycles. Double pole configuration, case and cover is polyester UL-VO. 8 mm total plunger travel.Main features Mains pushbutton switches for PC boards Highest dielectric 6 KVLatchdown mechanism

  • IZ Series - metal - momentary - PCB

    The IZ series is a rear mounted pushbutton, available with a polyamide or a metal case. This product has been designed to reduce the assembly cost in 2 application types: wave soldering and when using a connector. The IZ series allows flush panel mounting and makes dismounting easier.Main featuresRear mounting for easier installationMomentary metal...

  • IZ series - metal - latching - PCB

    The IZ series is a rear mounted pushbutton, available with a polyamide or a metal case. This product has been designed to reduce the assembly cost in 2 application types: wave soldering and when using a connector. The IZ series allows flush panel mounting and makes dismounting easier.Main features Rear mounting for easier installationLatching action metal...

  • IZ series - plastic - momentary - PCB

    The IZ series is a rear mounted pushbutton, available with a polyamide or a metal case. This product has been designed to reduce the assembly cost in 2 application types: wave soldering and when using a connector. The IZ series allows flush panel mounting and makes dismounting easier.Main features Rear mounting for easier installationMomentary modelsScrew...

  • IZ series - plastic - latching - PCB

    The IZ series is a rear mounted pushbutton, available with a polyamide or a metal case. This product has been designed to reduce the assembly cost in 2 application types: wave soldering and when using a connector. The IZ series allows flush panel mounting and makes dismounting easier.Main features Rear mounting for easier installationLatching action...

Showing 1 - 13 of 13 items

Over 65 years of experience

International customer support

Broadest offering of HMI solutions

Integrated industrial processes

Constant innovation

Need help?
Ask our experts via live chat!

Callback request