call us: 1-877-246-7890
| MISCELLANEOUS HARDWARE & ACCESSORIES | ||
| Standard and Optional Mounting
Hardware and Accessories |
||
| A wide variety of standard and optional hardware, caps and switch guards are available for miniature and industrial toggles and pushbuttons. Choices include panel dress nuts, color caps and face plates, identified by series type. |
|
Part 1 Specification |
| Part 2 Specification | ||
| SEALING BOOTS | ||
| SEALING BOOTS | ||
| A broad range of neoprene and silicone sealing boots are offered for miniature and industrial toggle switches. Both full-toggle and half-toggle versions are available in a variety of colors. A sealing ring or washer is supplied standard with each boot. |
|
Boots Specification |
| NEW Toggle Switch Sealing Boots | ||
| APEM introduces 2 new neoprene switch
sealing boots. These boots feature a soft feel for easy gripping and environmental protection to IP67. These products are available in 2 sizes. The smaller version, part number U2252, can be mounted on the standard levers of 12000, 3500, 3600 and 600 toggle switches, while the larger one, part number U2197, is intended for the X2243 long lever of the 3600 and 600 series. |
|
U2197 Specification |
| U2252 Specification | ||
| SECURITY CAPS | ||
| Security Caps | ||
| Protection provided against inadvertent lever operation for 2 or 3 position switches. Designed for use on 11.9 (.468) or 12mm (.472) threaded bushing and lever length 17.5mm (.688) outside bushing. Available in most colors and black/yellow stripes. |
|
Caps Specification |
| 15A and 25A Terminal Posts | ||
| Insulated and non-insulated terminal posts, available in 8 colors Operating temperature of -40 to +70 degrees C |
|
B Specification |
| LED INDICATORS | ||
| Professional LED indicators | ||
| Indicators with red, yellow, or green built-in LED available in 6mm (.236) and 8mm (.314) bushing diameters. Available sealed or unsealed with bright or black chrome finish. Standard mounting hardware supplied with all models. |
|
VL Specification |
| Panel Mount LED indicators | ||
| APEM’s Q-Series indicators are offered in red, green, yellow, blue and white, and are available with optional bicolor, tricolor and flashing LED’s. Available in 6mm, 8mm and 14mm packages, with bright chrome, black chrome and satin grey finishes. Integral resistors allow for direct connection to 12VDC, 12VAC/DC, 24VDC, 24VAC/DC, 110VAC and 220VAC. |
|
Indicators Specification |
| © 2007 APEM Components, Inc. All rights reserved. | ||
