Print this page 

Stay Connected:

     Twitter Linkedin

Rocker Switches

12 products found


KI - Rectangular LED indicators

The design of the KI series matches the state-of-the-art appearance of the KR, based on curved lines. APEM offers a wide choice of 8 bezel colors, 3 different terminal types and 5 LED colors. For right in the sun applications, a super bright LED option is available.


KR - Power rocker switches

Sealed rocker switch suited for marine, off-road, transportation and agriculture markets. Single and double pole models are available with solder lug, quick connect and screw terminals and with illumination possibilities.


CAN Bus Integrated Multiplexed Rocker Module

The KS system is a modular mechatronics concept integrating rocker switches and a CAN controller. The KS system uses a CAN bus to communicate the status of rocker switches and provide software control of the blacklight LEDs.


KL - Locking power rocker switches

Power rocker switches available with 2 or 3 positions, with one locked position. Actuator must be pressed to activate the protected function of the rocker. Two frames protect the unlocking actuator from untimely activation. Patented intuitive ergonomics.


KG - Sealed power rocker switches

Industrial size SPDT and DPDT models, illuminated or non-illuminated, sealed to IP65, VDE approved with up to a 15 amp rating. Rocker markings available. Raised protection bezel preventing inadvertent actuation of the rocker.

2600 APEM

2600 Power rocker switches

Industrial size single pole and double pole models with 3 rocker shapes in a variety of colors. Illuminated or non-illuminated. Solder lug, quick connect or screw terminals available. Rockers can be custom marked. UL, CSA, and VDE approvals and up to 16 amp ratings.


FM - Industrial rocker switch

Industrial rocker switches - panel cut-out 19x13 Single pole rocker switches, illuminated or non-illuminated with solder lug, quick connect or pc terminals. Rated up to 10 amps. Numerous actuator colors, plus UL & VDE approvals.


Power rocker switches for peak currents

Some 2600 series rocker switch models are intended for peak currents up to 150A 250VAC. Available in double pole configuration, they feature silver cadmium oxide contacts. They are UL / CSA approved (16A 250VAC - 1/3HP 250VAC // 16A 125VAC - 1/6HP 125VAC).


MT - Sealed selector switches

The MT is an environmentally sealed rocker switch that is actuated with a rocking motion. Multiple single functions available. Various contact materials that allow usage from dry circuit applications up to 4A. This sealed rocker switch comes in a single pole double throw (SPDT switch) package and is available in two or three positions; momentary and maintained functions.


AS - Miniature snap-in rocker switches

Single pole rocker switches in numerous electrical configurations. Black case, a variety of actuator colors, solder lug or straight pc terminals, UL and CSA approved, silver or gold plated terminals. Ratings up to 4 amps.